by max | Feb 28, 2026 | FAQs, Knowledge Base
Pool fencing legislation in Australia has developed progressively since the early 1990s, with each state and territory introducing requirements at different points. Queensland was among the earlier adopters, introducing and progressively tightening mandatory... by max | Feb 28, 2026 | FAQs, Knowledge Base
There’s no single universal setback distance that applies to all pools in Queensland, but there are several overlapping rules that determine how close your pool can be to a boundary fence – and whether that boundary fence can form part of your pool... by max | Feb 28, 2026 | FAQs, Knowledge Base
The consequences of not having a compliant pool fence in Queensland are serious, and they operate on multiple levels. From a legal standpoint, local councils actively enforce pool safety compliance. Homeowners found with a non-compliant or absent pool barrier can face... by max | Feb 28, 2026 | FAQs, Knowledge Base
Yes. It is illegal to have an unfenced swimming pool anywhere in Australia. Every state and territory requires a compliant barrier around any pool or spa with a water depth of 300mm or more. In Queensland, this is enforced under the Pool Safety Act 2010 and the... by max | Feb 28, 2026 | FAQs, Knowledge Base
Pool fencing failures during compliance inspections almost always come down to the same handful of issues. Being aware of them early – ideally during the design process – saves significant time and cost later. The most common mistakes include gates that... by max | Feb 28, 2026 | FAQs, Knowledge Base
Technically, yes – in Queensland you can install your own pool fencing as a homeowner. However, the fence must still pass a compliance inspection by a licensed pool safety inspector before it can be certified. If it fails, you’re responsible for rectifying...
